3D innovations DeskCycle Vive Panduan Pengguna - Halaman 5

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Sepeda Latihan 3D innovations DeskCycle Vive. 3D innovations DeskCycle Vive 12 halaman.

Left Pedal

The letter L is marked on

the end of the pedal shaft.

Install the Pedals

There is a Left Pedal and a Right Pedal. They are marked with an L for Left or an R for Right on the end

of the pedal shaft.

•

Screw the Left Pedal into the Left Pedal Arm COUNTER-CLOCKWISE.

•

Screw the Right Pedal into the Right Pedal Arm CLOCKWISE.

Tips for Installing the Pedals:

1. Make sure the pedal is straight when you screw it in.

2. Rotate the shaft with your fingers to get the threads

started.

3. If you can't get the threads started with your fingers

then it is cross threaded. Unscrew the pedal, make sure

the pedal is straight, and then try again.

Insert the Batteries into the Display

The display snaps into the bike. It's connected to the bike by a

wire at the bottom of the display.

1. Carefully pry the top of the display out using your fingers.

2. Install two AAA batteries into the back of the display. Pay

attention to the polarity. The battery holder shows the proper

polarity.

3. Press the display back into the bike.

Assembly (continued)

Right Pedal

The letter R is marked on

the end of the pedal shaft.