3D innovations DeskCycle Vive Gebruikershandleiding - Pagina 5
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} 3D innovations DeskCycle Vive. 3D innovations DeskCycle Vive 12 pagina's.
Left Pedal
The letter L is marked on
the end of the pedal shaft.
Install the Pedals
There is a Left Pedal and a Right Pedal. They are marked with an L for Left or an R for Right on the end
of the pedal shaft.
•
Screw the Left Pedal into the Left Pedal Arm COUNTER-CLOCKWISE.
•
Screw the Right Pedal into the Right Pedal Arm CLOCKWISE.
Tips for Installing the Pedals:
1. Make sure the pedal is straight when you screw it in.
2. Rotate the shaft with your fingers to get the threads
started.
3. If you can't get the threads started with your fingers
then it is cross threaded. Unscrew the pedal, make sure
the pedal is straight, and then try again.
Insert the Batteries into the Display
The display snaps into the bike. It's connected to the bike by a
wire at the bottom of the display.
1. Carefully pry the top of the display out using your fingers.
2. Install two AAA batteries into the back of the display. Pay
attention to the polarity. The battery holder shows the proper
polarity.
3. Press the display back into the bike.
Assembly (continued)
Right Pedal
The letter R is marked on
the end of the pedal shaft.
3