AcouLab Premiere S 소유자 매뉴얼 - 페이지 14

{카테고리_이름} AcouLab Premiere S에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AcouLab Premiere S 19 페이지. Active loudspeaker with motional feedback & dsp

Indicator LEDs

The status LED located on the front of the speaker gives information

about the power state of the device, as well as indicating errors.

• Constant Red

Indicates that the product is in standby mode

• Constant White

Indicates that the product is on and working properly.

• Slow Blinking White

Indicates that clipping is about to happen. The device will

continue operating normally.

• Fast Blinking White

Indicates that clipping is happening. The device has attenuated

low frequency to prevent damage to its drivers.

• Red / White blinking

Indicates that a severe clipping event has occurred. The product

has shut down to prevent damage.

• Slow Blinking Red

Indicates an over-temperature condition.

• Fast Blinking Red

Indicates an unknown critical error. Contact AcouLab if the

problem persists.

Indicates the currently used input.

Indicates the currently set position (if applicable).

Indicates the currently used power mode setting.