AcouLab Premiere S Gebruikershandleiding - Pagina 14

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} AcouLab Premiere S. AcouLab Premiere S 19 pagina's. Active loudspeaker with motional feedback & dsp

Pagina afdrukken

Indicator LEDs

(3.1) Status LED

The status LED located on the front of the speaker gives information

about the power state of the device, as well as indicating errors.

• Constant Red

Indicates that the product is in standby mode

• Constant White

Indicates that the product is on and working properly.

• Slow Blinking White

Indicates that clipping is about to happen. The device will

continue operating normally.

• Fast Blinking White

Indicates that clipping is happening. The device has attenuated

low frequency to prevent damage to its drivers.

• Red / White blinking

Indicates that a severe clipping event has occurred. The product

has shut down to prevent damage.

• Slow Blinking Red

Indicates an over-temperature condition.

• Fast Blinking Red

Indicates an unknown critical error. Contact AcouLab if the

problem persists.

(3.2) Input LED

Indicates the currently used input.

(3.3) Position LED

Indicates the currently set position (if applicable).

(3.4) Power Mode LED

Indicates the currently used power mode setting.