3D innovations MagneTrainer 소유자 매뉴얼 - 페이지 5
{카테고리_이름} 3D innovations MagneTrainer에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. 3D innovations MagneTrainer 12 페이지. Extended range
페이지 인쇄
- 1. Table of Contents
- 2. Cautions and Safety
- 3. Assembling Your Magnetrainer
- 4. Using the Magnetrainer with Your Legs
- 5. Using the Magnetrainer with Your Arms
- 6. Adjusting the Pedal Resistance
- 7. Keeping the Bike in Place
- 8. Using the Display
- 9. Care and Maintenance
- 10. Spare Parts
- 11. Support
- 12. Contact
- 13. Optional Accessories
- 14. Free Software
- 15. Warranty
Step 2: Install the Adjustable Leg
Place the bike on a hard flat surface.
Insert the Adjustable Leg into the Bike.
Then screw the Wing Nut into the Bike and
tighten by hand.
For the maximum stability, extend the
Adjustable Leg as far out as possible.
Step 3: Install the Pedals
Screw the left pedal into
the left pedal arm
COUNTER-CLOCKWISE.
Screw the right pedal
into the right pedal arm
CLOCKWISE.
IMPORTANT!
Tighten the pedals well using the
tool!
Using the bike with loose pedals will
damage the pedal arm threads.
Damaged pedal arm threads are
NOT covered under the warranty.
Step 4: Install the LCD Display
Plug the Connector into the Display. Then
carefully slide the Display onto the Display
Bracket.
3