Dish Network Home Network 설치 지침 매뉴얼 - 페이지 8

{카테고리_이름} Dish Network Home Network에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dish Network Home Network 18 페이지.

Connecting the Satellite Receiver to an Available Ethernet

Port

If the satellite receiver is located close to the router, gateway, or Ethernet switch, use the steps Connecting

the Satellite Receiver Using Ethernet Cable, below. If the satellite receiver is not located close to the

router, gateway or Ethernet switch, use the steps Connecting the Satellite Receiver Using a HomePlug-to-

Ethernet Adapter on page 8.

Refer to Diagrams 3 and 4 and the instructions below to connect the satellite receiver to the router,

gateway, or Ethernet switch using an Ethernet cable.

: If using pre-existing Ethernet jacks in the home, the jacks must be properly wired for Ethernet. Some

Note

home phone systems use Cat-5 cable and jacks that are wired to support phone systems, not Ethernet. Refer

to your local consumer electronics store or home network installer for more details. Using a HomePlug-to-

Ethernet adapter will likely result in an easier installation.

Diagram 3. Overview of Home Network with Receiver Connected by Ethernet Cable

Ethernet

Port

Ethernet

Jack

Ethernet

Port

Diagram 4. Connecting the Receiver to the Router Using Ethernet Cable

Page 7