Dish Network Home Network 설치 지침 매뉴얼 - 페이지 9
{카테고리_이름} Dish Network Home Network에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dish Network Home Network 18 페이지.
페이지 인쇄
Connect one end of the Ethernet cable to an available
gateway, or Ethernet switch.
Connect the other end of the Ethernet cable to the
receiver, verifying the cable "clicks" into place. Check the lights on the receiver's
•
The green light should be lit indicating the
active port on the router/switch.
•
The yellow light flashes whenever data is being received over the connected Ethernet cable.
Refer to Setting up the Receiver on page 10 to complete the installation and verify the receiver's
Internet connection.
Connecting the Satellite Receiver Using a HomePlug-to-Ethernet Adapter
Refer to Diagrams 5 and 6 and the instructions below to connect the satellite receiver to the router,
gateway, or Ethernet switch using a HomePlug-to-Ethernet Adapter.
Diagram 5. Overview of Home Network with Receiver Connected by HomePlug-to-Ethernet Adapter
Diagram 6. Connecting the Receiver to the Router Using a HomePlug-to-Ethernet Adapter
Page 8
Ethernet
Port
Ethernet
Port
E
(
LAN
THERNET
port on the back of the satellite
E
THERNET
E
port is enabled and connected to an
THERNET
) port on the router,
E
port.
THERNET