Dish Network ViP 211 Series 사용자 지정 매뉴얼 - 페이지 6

{카테고리_이름} Dish Network ViP 211 Series에 대한 사용자 지정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dish Network ViP 211 Series 10 페이지. Quick facts; quick remote control programming & tips for installers
Dish Network ViP 211 Series에 대해서도 마찬가지입니다: 빠른 참조 매뉴얼 (2 페이지), 시작하기 (2 페이지), 설정 지침 (2 페이지), 매뉴얼 (2 페이지)

페이지 인쇄

Chapter 10

Changing the Program Guide Order

Note: When both audio signals are present in the program, the receiver defaults to Dolby

Digital output unless you have selected PCM Only.

Note: If you have selected Dolby Digital Only but there is only PCM audio in the program,

you will hear nothing. This also applies to the analog audio outputs.

Select one of the following:

•

Line Mode. When you use this setting, in comparison to RF Mode, the dynamic range

is wider, which makes the music and loud noises louder, but voices quieter.

•

RF Mode. When you use this setting, in comparison with Line Mode, the dynamic

range is narrower, which makes music and loud noises quieter, but voices louder.

Select Done.

HANGING THE

You can set up the Program Guide to list channels in descending order, with the highest

channel number at the top, or in ascending order, with the highest channel number at the

bottom.

Note: If you do not set a channel order, the Program Guide lists the channels in

descending order.

Press MENU, select Preferences (8), and then Channel Order (5).

Select Ascending or Descending.

Select Done.

ROGRAM

UIDE

RDER