Aroma360 VanGogh360 지침 - 페이지 2
{카테고리_이름} Aroma360 VanGogh360에 대한 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Aroma360 VanGogh360 4 페이지.
Aroma360 VanGogh360에 대해서도 마찬가지입니다: 지침 (4 페이지), 빠른 시작 매뉴얼 (2 페이지), 문제 해결 매뉴얼 (2 페이지)
페이지 인쇄
1. Press "SET" and the hour will flash. Press "UP" or "DOWN" to adjust to the current hour and press set to
confirm your choice. (Please note that this is a 24-hour clock so if the current time is 5:30pm, set the time
to 17:30.
2. The minute will now be flashing. Press "UP" or "DOWN" to adjust to the current minute and press set to
confirm your choice.
3. The day of the week will now be flashing. Press "UP" or "DOWN" to adjust to the current day of the week
and press set to confirm your choice.
The Vangogh360 allows up to 4 different working/operating periods for different times and different days of
the week. For example:
Example 1
Event 1
M – F - 8:00-17:00
Event 2
Sat 10:00-18:00
Event 3
Sun 9:00-12:00
Event 4
Sun 15:00-20:00
1. Press "MODE" and "EVENT 1 ON" will appear. This represents the On Time for the first working period.
Press "UP" or "DOWN" to adjust the hour, press "SET" to confirm the hour and the minute button will begin
to flash. Press "UP" or "DOWN" to adjust the minute, press "SET" to confirm the hour and the day will begin
to flash. Press "UP" or "DOWN" and different days of the week will flash. Select what days of the week you
would like this operating period to be applicable. Once the desired days have been selected, press "SET" to
confirm.
2. Press "MODE" and "EVENT 1 OFF" will appear. This represents the Off Time for the first working period. Press
"UP" or "DOWN" to adjust the hour, press "SET" to confirm the hour and the minute button will begin to flash.
Press "UP" or "DOWN" to adjust the minute, press "SET" to confirm the hour and the day will begin to flash.
• The unit cannot be set to run past midnight. You must split the setting between 2 different working periods. For
example:
i. EVENT 1 ON – 22:00 EVENT 1 OFF – 23:59
ii. EVENT 2 ON – 00:01 EVENT 2 OFF – 04:00
3. Press "MODE" and the display will show "SCENT WORK PAUSE" which allows you to adjust the scent intensity
for the first working period. You can set it between 5% and 95% (with 5% being the lowest setting and 95%
being the highest setting).
4. Once you have the desired scent intensity, press "MODE" and "EVENT 2 ON" will appear. This will allow you
to set the On Time for the second working period. If you only want one operating period, keep pressing "MODE".
Place the unit in an open space with no furniture/fixtures covering or blocking the unit.
•
If using the Vangogh360 as a stand-alone unit, be sure to switch the fan on (the button is on the top of
•
the unit). This will allow the scent to disperse and avoid scent concentration in a particular area.
The unit must always stay in its upright position. If it tips over with oil inside, it will break the diffuser.
•
Always remove the oil when transporting the unit.
•
Only Aroma360 oils should be used in the diffuser. Failure to do so will void any warranty.
•
If using the diffuser in a public space, we suggest using the lock feature for the control panel to prevent
•
tampering with the settings. (Hold the MODE button for 10 seconds. When you hear a long beep, it
means the settings are locked. To unlock, hold the MODE button for another 10 seconds.)
Setting the Time/Day
Setting the Working Times
Example 2
All Days – 9:00-11:00
All Days -12:00-14:00
All Days – 16:00-
18:00
All Days – 20:00-
22:00
Tips for Using your Vangogh360
Example 3
M, W, F – 9:00 –
17:00
T, Th – 10:00 – 18:00
Sat – 11:00 – 20:00
Sun – 8:00 – 17:00
Example 4
M-Sun - 9:00 –
17:00
N/A
N/A
N/A