Acoustic Class D NEO Dymium Series 소유자 매뉴얼 - 페이지 11
{카테고리_이름} Acoustic Class D NEO Dymium Series에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Acoustic Class D NEO Dymium Series 16 페이지. Bass amplifiers
1
2
3
9
10
8
B1000HD FRONT PANEL
1. Pad: Activates -10dB pad to reduce input sensitivity for use with active electronics basses or high output pickups . Indicator lights
blue when hi gain creates preamp clipping
2. Acoustic-comp™: Activates the built-in compression circuit. Light indicates compressor is active.
3. On/Off Switch: Activates the Overdrive circuit
4. Mute: Mutes the input signal
5. Super-lo: activates low frequency boost (+3dB at 40Hz).
6. Super-hi: activates high frequency boost (+2dB at 7kHz).
7. Notch Enable: activates the notch filter (#16).
8. Bass Input: 1/4" two-conductor jack
Note: Turn the volume all the way down before plugging in your guitar and adjust the volume according to your taste.
9. Gain: Adjusts the input level signal gain of the amplifier
10. Overdrive: Controls the amount of overdrive when overdrive switch (#3) is engaged.
11. Blend: Adjusts the balance between the clean and overdrive channels when overdrive switch (#3) is engaged.
12. EQ On/Off: engages the graphic EQ sliders (#13) when depressed. Indicator button and EQ sliders will light when active.
13. Graphic EQ (sliders labeled 40 — 6.8K): These sliders increase or decrease the level of the associated frequency
14. Lo EQ: adjusts overall low frequency EQ +/-12dB @ 60Hz
15. Hi EQ: adjusts overall high frequency EQ +/-12dB @6kHz
16. Notch: Adjusts the notch filter frequency from 50Hz (left) to 1kHz (right) when notch enable (#7) is engaged.
17. Master: Adjusts overall volume level of the amplifier
B300HD, B600HD, B1000HD, BN3112, BN3115, BN6210, BN410, BN210, BN112, BN115
4
11
12
|
5
13
14
www.acousticamplification.com
SERIES
6
7
15
16
17
11