Acoustic Class D NEO Dymium Series Kullanıcı El Kitabı - Sayfa 11

Amplifikatör Acoustic Class D NEO Dymium Series için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Acoustic Class D NEO Dymium Series 16 sayfaları. Bass amplifiers

Sayfayı Yazdır

Acoustic Class D NEO Dymium Series Kullanıcı El Kitabı

B1000HD FRONT PANEL

1. Pad: Activates -10dB pad to reduce input sensitivity for use with active electronics basses or high output pickups . Indicator lights

blue when hi gain creates preamp clipping

2. Acoustic-comp™: Activates the built-in compression circuit. Light indicates compressor is active.

3. On/Off Switch: Activates the Overdrive circuit

4. Mute: Mutes the input signal

5. Super-lo: activates low frequency boost (+3dB at 40Hz).

6. Super-hi: activates high frequency boost (+2dB at 7kHz).

7. Notch Enable: activates the notch filter (#16).

8. Bass Input: 1/4" two-conductor jack

Note: Turn the volume all the way down before plugging in your guitar and adjust the volume according to your taste.

9. Gain: Adjusts the input level signal gain of the amplifier

10. Overdrive: Controls the amount of overdrive when overdrive switch (#3) is engaged.

11. Blend: Adjusts the balance between the clean and overdrive channels when overdrive switch (#3) is engaged.

12. EQ On/Off: engages the graphic EQ sliders (#13) when depressed. Indicator button and EQ sliders will light when active.

13. Graphic EQ (sliders labeled 40 — 6.8K): These sliders increase or decrease the level of the associated frequency

14. Lo EQ: adjusts overall low frequency EQ +/-12dB @ 60Hz

15. Hi EQ: adjusts overall high frequency EQ +/-12dB @6kHz

16. Notch: Adjusts the notch filter frequency from 50Hz (left) to 1kHz (right) when notch enable (#7) is engaged.

17. Master: Adjusts overall volume level of the amplifier

B300HD, B600HD, B1000HD, BN3112, BN3115, BN6210, BN410, BN210, BN112, BN115

www.acousticamplification.com

SERIES