Arometrix FRACTION FINDER 사용자 설명서 - 페이지 15

{카테고리_이름} Arometrix FRACTION FINDER에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Arometrix FRACTION FINDER 17 페이지.

ii. If an accidental spill occurs, try to wipe it off the sensor/monitor with a damp, not

soaked, cloth/towel as quickly as possible. Dry off the area immediately afterward.

Other issues and suggestions:

1) We have all of our Fraction Finder resources (including different application notes and our

Chemical Cheat Sheet) available at arometrix.com/resources.

2) We are constantly working to fix any issues with the system, and appreciate you reporting any

abnormal behavior, we will not leave you hanging and will address any issues you have ASAP.

3) If you find anything in this manual confusing or unclear, please email us at [email protected];

we are more than happy to assist you, and do our best to do so in a timely manner.

4) If you want to see something new in the software please let us know and give your suggestion, we

strive to make the FRACTION FINDER the tool that works for you!

Section 8: Software Update Instructions

At Arometrix, we strive to tailor-make all our products to our customers' needs. As we advance our

algorithms, add features, fix bugs, etc., we release software/firmware updates. These are field-updatable.

If you own a FRACTION FINDER, you can download our latest, free Firmware update to your software in the

field: Version 1.2.4 - (if you do not already have it). This update will make FRACTION FINDER systems more

cohesive and user-friendly. Please visit arometrix.com/software to update your software.

The FRACTION FINDER displays optical information in AU (arbitrary intensity units), named to highlight the

fact that the unit is for reference, indication, and to assess trends. It is not currently for quantitative

analysis. Quantitative measurement is a number that represents a characteristic in known, well-understood

units. For example, your speedometer reads a quantitative number – speed. You know how fast you are

going based on that number. Qualitative measurement lacks the reference of a number. The FRACTION

FINDER gives qualitative measurement – and is used to assess trends, not absolute potency.

Manually Tuning Integration/Exposure Time -

algorithm will do all the adjustment autonomously. However, manual setting is feasible. Here is how...

Manually Setting Integration Time for Heads - Tune the Integration Time based on your desired parameters

1. Tune the exposure time so that the maximum intensity value (y-axis) is between 500-800 AU

a. The exposure time is pseudo-linear to the intensity (i.e. if the exposure time is doubled,

the intensity will approximately double; if the exposure time is halved, the intensity will

also approximately be halved)

b. The exposure time for the Heads typically is very small – the exposure time probably will

not be above 2 ms (2000 µs on exposure time setting panel), and may be lower than 0.1

ms (100 µs on exposure time setting panel)

c. WARNING: The update time for the plot will increase with increased exposure time and

decrease with decreased exposure time. Distillation is a slow process, so this will not be an

issue

Arometrix, Inc.

It is highly recommended to use the AID as the AID

arometrix.com/resources