Abbott FreeStyle Libre 3 빠른 시작 매뉴얼

{카테고리_이름} Abbott FreeStyle Libre 3에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Abbott FreeStyle Libre 3 2 페이지. Continuous glucose monitoring system
Abbott FreeStyle Libre 3에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (2 페이지)

페이지 인쇄

CONTINUOUS GLUCOSE MONITORING SYSTEM

Quick Start Guide

●

Apply Sensor to your body

STEP 1

Select site on back of upper arm.

Note:

Avoid scars, moles, stretch

marks, lumps and insulin injection

sites. To prevent skin irritation,

rotate sites between applications.

Consider your comfort and activities.

STEP 4

Place Sensor Applicator over site

and push down firmly to apply Sensor.

Do NOT push down on

CAUTION:

Sensor Applicator until placed over

prepared site to prevent unintended

results or injury.

●

Start new Sensor with Reader

STEP 1

10:23

No Active Sensor

View Glucose

Review History

Start New Sensor

Press Home Button to turn on Reader.

Then touch Start New Sensor when

you see this screen.

If using Reader for the first time,

Note:

follow the prompts to set up the Reader.

Setup Overview

Refer to your User's Manual for full System instructions and information.

Reader

USB Port

STEP 2

Wash site using a plain soap,

dry and then clean with alcohol

wipe. Allow site to air-dry before

proceeding.

STEP 5

Sensor

Gently pull Sensor Applicator

away from your body.

STEP 2

Start New Sensor

Scan Sensor to start it.

Hold the Reader so the

screen touches the

Sensor.

Hold Reader so that the screen touches the Sensor

to start it. You may need to move your Reader

around slowly until you find the right spot.

Note:

Before you start your Sensor, choose which

device you want to use. If you start the Sensor

with the Reader, you will be unable to use the App

to check your glucose or receive alarms.

●

Touchscreen

Home Button

●

Sensor

Applicator

●

Tamper

Label

Unscrew cap

from Sensor

Applicator.

CAUTION:

• Do NOT use if damaged or if tamper label

indicates Sensor Applicator has already

been opened.

• Do NOT put cap back on as it may damage

the Sensor.

• Do NOT touch inside Sensor Applicator as it

contains a needle.

Review the important information on the screen.

Reader will automatically display your glucose

reading after 60 minutes.

Apply Sensor to your body

Start new Sensor with Reader

Wait 60 minutes

for start-up

Check your glucose whenever you

want for up to 14 days

STEP 3

Cap

STEP 6

Make sure Sensor is secure.

Put the cap back on the Sensor

Applicator. Discard the used

Sensor Applicator. See Disposal

section in the User's Manual.

STEP 3

New Sensor

Starting Up

Sensor can be used in:

minutes