Arrakis Systems ARC BLUETOOTH 운영 지침 - 페이지 4

{카테고리_이름} Arrakis Systems ARC BLUETOOTH에 대한 운영 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Arrakis Systems ARC BLUETOOTH 8 페이지.

HOW TO CONNECT AND USE A CELL PHONE

The Bluetooth feature of the ARC series console allows you connect your cell phone to

the ARC series console. Thus, enabling you to take calls on your cell phone and either

put them on air, or record the call on the Audition

bus. To do this:

1. Pair your cell phone to the Bluetooth ARC

console using the steps from the previous

section. The red Drop button will be lit if

your cell phone is connected.

2. Turn on the Bluetooth channel on your

board. (CH 10 for the ARC-10, CH 15 for

the ARC-15)

3. Put the Bluetooth channel either on PGM

to put the caller on-air, or AUD if you want to put the caller on the AUD output.

4. When a call comes in on your cell phone, you will notice that the green Call

button will flash. Press the green Call button to accept the call. Press the red

Drop button to reject (clear) the call.

5. When you are finished with the call, press the red Drop button to end the call.

You may also accept, reject or drop the call using your cell phone.

IMPORTANT NOTE: When talking to the caller, you will be using the Mic channel on

the console (NOT your cell phone mic). When a Mic channel is on, then the Monitor

speakers will be muted, and you will only be able to hear the caller through the

Headphone output. You may also adjust the volume of your caller on your phone, as well as

on the console's Bluetooth channel.

IMPORTANT NOTE: When a call comes in to your cell phone, the ring will play

through the Bluetooth channel. For the best quality sound, we recommend to leave

the Bluetooth channel on the AUD output for when the call comes in. That way the

ring will not play over the air. You can then prepare the caller, and when ready, switch the

channel to PGM to put the caller on air.