Aerial Airborne Wakeboard Tower 설치 매뉴얼 - 페이지 14

{카테고리_이름} Aerial Airborne Wakeboard Tower에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Aerial Airborne Wakeboard Tower 14 페이지.

installing tHe naVigation ligHt

the navigation light is shipped separately.

It is designed to be installed on the top of the tow point.

for a clean wiring installation the wires supplied can be passed through the

center of the tow point, along the inside of the top section and down inside

the leg tube. The wires will need to exit the leg tube just above the fittings

and then be passed over the fittings before entering back into the side rail

tube. finally the wires will exit the side rail tube just above the mounting foot

and then enter the deck of the boat (through a hole that will need to be

drilled) so that they can be connected to a switch and power source.

Note: The tower is not supplied with pre-drilled wiring holes as each customer

may have a different wiring requirement depending on how they fold their

tower or the accessories that they will mount to the tower.

nAvIGAtIon lIGht

(shIppED sEpArAtEly)

Questions?

www.aerialwakeboarding.com

GUIDE#: pwb-AIrbornE-v1-004