Abbriata Miniroto M50 빠른 시작 매뉴얼 - 페이지 7
{카테고리_이름} Abbriata Miniroto M50에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Abbriata Miniroto M50 19 페이지.
페이지 인쇄
Abbriata M50 Quick Start Guide
Copyright 2015 Tractor Tools Direct
Tighten the bolts on the baler to keep the draw bar up. Be sure they are tight and the teeth are engaged, if loose
the baler will fall forward.
Using a 19 mm or ¾" wrench, loosen the bolts on both sides of the 2
nd
adjustment and fold down the draw bar.
Then tighten the bolts being sure the teeth are engaged and tight, if loose the baler will fall forward.
Figure 7 draw bar folded down
Hitch pin for pintle hitch
Prepare the hitch pin on your tractor draw bar.
Figure 8 hitch pin parts assembled
The board with a hole represents the draw bar on the tractor.
The hitch attaches to the baler like this.
Page | 6