Abbriata Miniroto M50 빠른 시작 매뉴얼 - 페이지 5

{카테고리_이름} Abbriata Miniroto M50에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Abbriata Miniroto M50 19 페이지.

Abbriata M50 Quick Start Guide

Figure 2 center draw type are attached to the pallet with the draw bar folded up for shipping

The tools needed for this operation are as follows:

1. 24 mm socket (15/16 will substitute)

2. 22 mm wrenches, or adjustable (7/8 will substitute)

3. 19 mm wrench or socket (3/4 will substitute)

4. Crowbar or wrecking bar for removing nailed down wood

Do not cut the steel strapping around the wheels until directed to do so. The strapping will hold the unit in place

for your safety.

Figure 3 leave the steel strapping in place

Using a 24 mm socket (15/16 sub.) loosen the bolt holding the angle adjustment in place on both sides. Do not

remove the bolt.

Page | 4