abc Fleck 5600SXT 매뉴얼 - 페이지 11

{카테고리_이름} abc Fleck 5600SXT에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. abc Fleck 5600SXT 13 페이지. Water softener with upflow carbon tank

Programming

Step 1 – Confirm All Product Components

**Note during normal operations it is normal for the water level to be

anywhere from 1/3 to 2/3 full of water, depending on the salt level at the

Programming Your Hardness Water Softener

Step 1. Conduct hardness test on your water to obtain this number.

Step 2. Press & Hold both 'Up' & 'Down' arrows together until screen

changes to DO (Day Override). This may take 5 seconds before change.

Step 3. Select # of days for DO. We suggest 14 days. Press 'Cycle' button

(icon of arrows in diamond pattern) after days are set.

Step 4. Set Regeneration Time (RT). We suggest setting to 2:00am. This is

the time that the system will regenerate. Press 'Cycle' button after setting

time.

Step 5. Set Hardness (H). Based on hardness test number. Press 'Cycle'

button after set.

Step 6. Reserve Capacity (RC) should be set at 75 gallons per person in

household. Example: 2 people x 75 gal = 150 reserve capacity. Press 'Cycle'

button to complete.

1. Add 3 bags of salt pellets or rock salt along

with 5 gallons of water to the brine tank.

**Add only 2 bags if using a SPACE SAVER

system.

time of regeneration.