abc Fleck 5600SXT 매뉴얼 - 페이지 9

{카테고리_이름} abc Fleck 5600SXT에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. abc Fleck 5600SXT 13 페이지. Water softener with upflow carbon tank

Attach Tank Lines

Step 6 – Attach Drain Line to Fleck Meter

Step 7 – Connect Brine Line to Fleck Meter

Step 8 – Connect Brine Well to Tank Side Wall

1. Wrap threaded connection point with 3-4

wraps of Teflon tape. Install provided plastic

barbed fitting.

2. Install drain line (not included) to barbed

fitting (found on Fleck valve) with a stainless

hose clamp (not included). Drain line should

extend to a main drain to dispose of waste

water.

1. Prep brine line prior to install using brass

nut, plastic Ferrule & brass tube insert.

2. Connect provided brass nut to the Fleck

valve. Be careful not to overtighten. Over-

tightening will cause damage.

1. Locate predrilled hole in brine tank. Fas-

ten brine well to side wall of brine tank using

the white overflow elbow & plastic nut.

* This is preinstalled on Space Saver version.