abc Fleck 5600SXT Handbuch - Seite 9
Blättern Sie online oder laden Sie pdf Handbuch für Wasserspender abc Fleck 5600SXT herunter. abc Fleck 5600SXT 13 Seiten. Water softener with upflow carbon tank
Seite drucken
Attach Tank Lines
Step 6 – Attach Drain Line to Fleck Meter
Step 7 – Connect Brine Line to Fleck Meter
Step 8 – Connect Brine Well to Tank Side Wall
1. Wrap threaded connection point with 3-4
wraps of Teflon tape. Install provided plastic
barbed fitting.
2. Install drain line (not included) to barbed
fitting (found on Fleck valve) with a stainless
hose clamp (not included). Drain line should
extend to a main drain to dispose of waste
water.
1. Prep brine line prior to install using brass
nut, plastic Ferrule & brass tube insert.
2. Connect provided brass nut to the Fleck
valve. Be careful not to overtighten. Over-
tightening will cause damage.
1. Locate predrilled hole in brine tank. Fas-
ten brine well to side wall of brine tank using
the white overflow elbow & plastic nut.
* This is preinstalled on Space Saver version.