CAME A 5024 N 설치 매뉴얼 - 페이지 2

{카테고리_이름} CAME A 5024 N에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. CAME A 5024 N 13 페이지. Ati series
CAME A 5024 N에 대해서도 마찬가지입니다: 설치 매뉴얼 (13 페이지)

"CAUTION: IMPROPER INSTALLATION MAY CAUSE SERIOUS DAMAGE, FOLLOW ALL INSTALLATION INSTRUCTIONS CAREFULLY"

1 Legend of symbols

This symbol tells you to read the section with particular care.

This symbol tells you that the sections concern safety issues.

This symbol tells you what to say to the end-users.

2 Intended use and restrictions

2.1 Intended use

The ATI 24V N gearmotor is speciﬁ cally engineered to automate residential and condominium swing gates, even under intensive

use.

2.2 Restrictions

The use of this product for purposes other than those described above and installation executed in a manner other than as instructed

in this technical manual are prohibited.

The company: Came Cancelli Automatici is ISO 9001:2000 quality certified; is has also obtained the ISO 14001 environmental

safeguarding certification. Came engineers and manufactures all of its products in Italy.

This product complies with the following standards: see declaration of compliance.

4 Description

4.1 Gearmotor

This product is engineered and manufactured by CAME CANCELLI AUTOMATICI S.p.A. and complies with current safety regulations.

Guaranteed 24 months if not tampered with.

The gearmotor is composed of two, cast aluminium half shells inside of which rest the gearmotor and endstops – with electro

blocking – and an endless screw, epicycloidal gear reduction system.

4.2 Technical features

Control board power supply: 230 A.C. 50/60Hz

Motor power supply: 24V D.C. 50/60Hz

Max draw.: 10A

Power: 120W

Opening time (90°): adjustable

4.3 Description of parts

1) Operator

2) Front bracket

3) Back swivel-joint

4) Back bracket

"IMPORTANT INSTALLATION, SAFETY INSTRUCTIONS"

"THIS MANUAL IS ONLY FOR PROFESSIONAL OR QUALIFIED INSTALLERS"

Gear ratio: 1/36

Duty Cycle: Intensive use

Protection Rating: IP44

Weight: 10 kg

Operating temperature