3DGence DOUBLE 서비스 매뉴얼 - 페이지 3

{카테고리_이름} 3DGence DOUBLE에 대한 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. 3DGence DOUBLE 3 페이지. Xy axes calibration

XY axes CALIBRATION OF 3DGENCE DOUBLE

8. If the printing does not comply with these requirements, make following corrections:

a) choose from printer's menu following commands: MENU → ADVANCED → XY CALIB.

b) enter the original dimension to X-axis = 100,

c) enter the measured dimension on X-axis,

d) enter the original dimension to X-axis = 100,

e) enter the measured dimension on Y-axis,

f) save the measurements by choosing: SAVE.

9. Print the model again, then repeat the actions until the measurements oscillate between 99,95 – 100,05

(the tolerance ± 0,05) and the difference between the measurements will be around 0 – 0,05.

05.2018

3DGence DOUBLE | Support: +48 438 98 64 | www.3dgence.com/support