CAME FROG-PM4 설치 매뉴얼 - 페이지 11

{카테고리_이름} CAME FROG-PM4에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. CAME FROG-PM4 13 페이지. Swing-gate operator
CAME FROG-PM4에 대해서도 마찬가지입니다: 설치 매뉴얼 (19 페이지), 설치 매뉴얼 (17 페이지), 사용 설명서 (12 페이지)

페이지 인쇄
CAME FROG-PM4 설치 매뉴얼
Installer's stamp
Job performed
______________________________________________________________________________________
__________________________________________________________________________________________________
______________________________________________________________________________________________

TROUBLESHOOTING

MALFUNCTIONS
The gate does not open or
close
The gate opens but does not
close
The flashing light does not
work

Phasing out and disposal

CAME S.p.A. employs a UNI EN ISO 14001 certified and compliant environmental protection system at its plants, to ensure that
environmental safeguarding.
We ask you to keep protecting the environment, as CAME deems it to be one of the fundamental points of its market operations
strategies, by simply following these brief guidelines when disposing:
DISPOSING THE PACKING MATERIALS
The packing components (cardboard, plastic, etc.) are solid urban waste and may be disposed of without any particular difficulty, by
simply separating them so that they can be recycled.
Before actions it is always advisable to check the pertinent legislation where installation will take place.
DO NOT DISPOSE OF IN NATURE!
DISPOSING OF THE PRODUCT
Our products are made using different types of materials. The majority of them (aluminium, plastic, iron, electric cables) can be
considered to be solid urban waste. They may be recycled at authorised firms.
Other components (electrical circuit board, remote control batteries etc.) may contain hazardous waste.
They must, thus, be removed and turned in to licensed firms for their disposal.
Before acting always check the local laws on the matter.
DO NOT DISPOSE OF IN NATURE!

DECLARATION OF CONFORMITY

Declaration
CAME S.p.A. declares that this device conforms to the essential, pertinent requirements provided by directives 2006/42/CE,
2004/108/CE.
An original copy of the declaration of conformity is available on request.
www.metalines.com
Name of operator
Job performed on (date)
Technician's signature
Requester's signature
POSSIBLE CAUSES
• No power supply
• The gearmotor is unlocked
• The transmitter battery is flat
• The transmitter is broken
• The stop button is stuck or broken
• The opening/closing button or the key selector switch are stuck
• The photocells are engaged
•The bulb has blown
CHECKS AND REMEDIES
• Check for mains power
• Lock the gearmotor
• Replace the batteries
• Contact service
• Contact service
• Contact service
• Make sure that the photocells are
clean and work correctly
• Contact service
• Contact service