Alto ELVIS 15.2XL 소유자 매뉴얼 - 페이지 10

{카테고리_이름} Alto ELVIS 15.2XL에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Alto ELVIS 15.2XL 16 페이지. Passive and active models
Alto ELVIS 15.2XL에 대해서도 마찬가지입니다: 사용자 설명서 (11 페이지)

페이지 인쇄

HOOK

2. QUICK START - ACTIVE SPEAKER CABINETS

Active, two satellite speakers & two subwoofers. In this example, the mixer is

connected to the ELVIS subwoofers and then a 125 Hz xovered line signal is sent

to the respective satellites. In this way, the high energetic content of the low

frequencies is limited to the subwoofer and the satellite' s woofer act like a mid

-woofer. As a consequence the satellites built-in amplifier is not stressed by low

frequency content.

1). Connect one side of signal cable at your mixer into Main Output Left / Right

(with1/4" Jack or XLR) and the other side of the cable into the Left / Mono

Input (COMBO) of the ELVIS active subwoofers; with the second signal cable

connect the Left/Mono Line Output of the subwoofer (Stereo / Mono-Jack

or XLR) to the Line input (COMBO) of the active satellite (with Stereo - Jack

or XLR).

2). Connect the power cord to mains.

3). Turn on your mixer first, then the active speaker cabinets.

4). Turn up the volume control of the active speaker cabinets.

5). Use PFL function to get the proper input level for the mixer, and adjust the

Main Mix Level control to manipulate the output level.

6). After use, turn off your active speaker cabinets first, then the mixer.

LINE IN

LINE OUT LEFT/MONO

ELVIS SUBWOOFER

MAIN OUT LEFT

LINE IN LEFT/MONO

MAIN OUT RIGHT

LINE IN LEFT/MONO

MIXER

LINE IN

LINE OUT LEFT/MONO

ELVIS SUBWOOFER