Alto ELVIS 15.2XL Gebruikershandleiding - Pagina 10

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Alto ELVIS 15.2XL. Alto ELVIS 15.2XL 16 pagina's. Passive and active models
Ook voor Alto ELVIS 15.2XL: Gebruikershandleiding (11 pagina's)

Pagina afdrukken

HOOK

2. QUICK START - ACTIVE SPEAKER CABINETS

Active, two satellite speakers & two subwoofers. In this example, the mixer is

connected to the ELVIS subwoofers and then a 125 Hz xovered line signal is sent

to the respective satellites. In this way, the high energetic content of the low

frequencies is limited to the subwoofer and the satellite' s woofer act like a mid

-woofer. As a consequence the satellites built-in amplifier is not stressed by low

frequency content.

1). Connect one side of signal cable at your mixer into Main Output Left / Right

(with1/4" Jack or XLR) and the other side of the cable into the Left / Mono

Input (COMBO) of the ELVIS active subwoofers; with the second signal cable

connect the Left/Mono Line Output of the subwoofer (Stereo / Mono-Jack

or XLR) to the Line input (COMBO) of the active satellite (with Stereo - Jack

or XLR).

2). Connect the power cord to mains.

3). Turn on your mixer first, then the active speaker cabinets.

4). Turn up the volume control of the active speaker cabinets.

5). Use PFL function to get the proper input level for the mixer, and adjust the

Main Mix Level control to manipulate the output level.

6). After use, turn off your active speaker cabinets first, then the mixer.

LINE IN

LINE OUT LEFT/MONO

ELVIS SUBWOOFER

MAIN OUT LEFT

LINE IN LEFT/MONO

MAIN OUT RIGHT

LINE IN LEFT/MONO

MIXER

LINE IN

LINE OUT LEFT/MONO

ELVIS SUBWOOFER