Camfil PM1 Tracker 사용 설명서 - 페이지 4

{카테고리_이름} Camfil PM1 Tracker에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Camfil PM1 Tracker 8 페이지. Indoor air quality (iaq) measurement device

Instruction Manual - PM1 Tracker

2. START/STOP OF THE UNIT

Hold the Selection Button for 2s. to start the PM1 Tracker.

The Main Menu appears.

Here you are able to select the different modes: PM 1ndex, Realtime

and Monitoring (this mode is only available if communications

settings are activated), Settings and Power Off of the unit.

The PM1 Tracker stops automatically if:

• PM 1ndex measurement ends and/or is idle for 20mins

• Realtime measurement launched and/or is idle for 10mins

• Monitoring mode launched and no battery charge for 2hours.

The PM 1ndex measurement displays the Indoor Air Quality after

15 minutes of data collection.

During this time:

• The Operational Indicator LED will blink in yellow

• After every minute, an intermediate result is displayed in the

Information Panel

A gauge at the bottom of the Information Panel indicates the

status of the test

• Hold the Selection Button to stop the measurement

• Press the Selection Button once during the measurement

process to display an intermediate result.

At the end of the test, the final result is displayed in the Information

Panel and the Operational Indicator LED will blink in green.

The result is still available for 20 minutes with a short press.

If the mode ALWAYS-ON is activated, and the unit is connected to

the main supply, the measure will start again after 10min.

Camfil - Clean air solutions

Ver. 5.0