Camille Bauer SINEAX G536 사용 설명서 - 페이지 14

{카테고리_이름} Camille Bauer SINEAX G536에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Camille Bauer SINEAX G536 17 페이지. Transducer for phase angle or power factor
Camille Bauer SINEAX G536에 대해서도 마찬가지입니다: 사용 설명서 (16 페이지)

페이지 인쇄

6. Commissioning and maintenance

Switch on the power supply and the measuring input. It is

possible during the operation to disconnect the output line

and to connect a check instrument, e.g. for a functional test.

No maintenance is required.

7. Releasing the transducer

Release the transducer from a top-hat rail as shown in

Fig. 6.

Fig. 6

9. Application notes

Current connection in

phase:

Voltage connection

between:

Vector diagrams

Current connection in

phase:

Voltage connection

between:

Vector diagrams

10. Instruments admissions

Germanischer Lloyd

Type approval certiﬁ cate:

12 261-98 HH

CSA approved for USA and Canada

ﬁ le-nr. 204767

L1 & L2

L2 & L3

L1 & L2

L2 & L3

8. Dimensional drawing

112.5

114.1

Fig. 7. Housing P13/70 clipped onto a top hat rail (35 ×15 mm or

35×7.5 mm, acc. to EN 50 022).

L3 & L1

L1 & L3

L3 & L1

FCC Compliance and Canadian DOC Statement

This equipment has been tested and found to comply with the limits

for a Class A digital device, pursuant to both part 15 of the FCC Rules

and the radio interference regulations of the Canadian Department

of Communications: These limits are designed to provide reasona-

ble protection against harmful interference when the equipment is

operated in a commercial environment. This equipment generates,

uses and can radiate radio frequency energy and, if not installed and

used in accordance with the instruction manual, may cause harmful

interference to radio communications. Operation of this equipment in a

residential area is like to cause harmful interference in which case the

user will be required to correct the interference at his own expense.

L2 & L1

L & N

12 13

4 5

L3 & L2