3DUpFitters CR-10S Pro/CRX R1 Enclosure Kit 사용 설명서 - 페이지 19

{카테고리_이름} 3DUpFitters CR-10S Pro/CRX R1 Enclosure Kit에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. 3DUpFitters CR-10S Pro/CRX R1 Enclosure Kit 20 페이지.

all of the volatile organic compounds coming oﬀ the hot end? The key is the negative pressure

combined with the fact that the particles are extremely small and light.

As you can see, the fan keeps the air ﬂowing in and the harmful particles ﬂowing into the vent

or ﬁlter.

3D Printer Design Matters

The other part of the equation is the printer design. Those printers where the hot end is at the

top of the enclosure make it easier to achieve higher temperatures because the hot air rises to

the top, and the vertical hot end position is ﬁxed. Those printers with the hot ends at the

bottom are always going to have more problems managing temperature simply because the

temperature is more likely to vary as the hot end goes from the bottom to the top of the

enclosure.