3DUpFitters CR-10S Pro/CRX R1 Enclosure Kit Manual de instruções - Página 19

Procurar online ou descarregar pdf Manual de instruções para Impressoras 3D 3DUpFitters CR-10S Pro/CRX R1 Enclosure Kit. 3DUpFitters CR-10S Pro/CRX R1 Enclosure Kit 20 páginas.

Imprimir página

all of the volatile organic compounds coming oﬀ the hot end? The key is the negative pressure

combined with the fact that the particles are extremely small and light.

As you can see, the fan keeps the air ﬂowing in and the harmful particles ﬂowing into the vent

or ﬁlter.

3D Printer Design Matters

The other part of the equation is the printer design. Those printers where the hot end is at the

top of the enclosure make it easier to achieve higher temperatures because the hot air rises to

the top, and the vertical hot end position is ﬁxed. Those printers with the hot ends at the

bottom are always going to have more problems managing temperature simply because the

temperature is more likely to vary as the hot end goes from the bottom to the top of the

enclosure.