esera 12002 구성 - 페이지 5
{카테고리_이름} esera 12002에 대한 구성을 온라인으로 검색하거나 PDF를 다운로드하세요. esera 12002 7 페이지.
페이지 인쇄Art. No. 12002
8
SETTINGS UDP SERVER
You may assign an IP address to the eBus coupler Ethernet via DHCP server or set it to a fixed IP address. We
recommend the operation with a fixed IP address.
Settings
If you set to fixed IP address, the gateway and DNS server settings are also
to be entered. The module must be operated in the same subnet as your computer Select UDP server.
Settings
• Fixed IP address
• Subnet Mask
• Gateway:
• DNS server:
1:
MAC address of the 1-Wire controller 1
2:
IP address, subnet mask and gateway and port: e.g. 5000
3:
Operating mode: UDP server, IP address and port of the control system.
To be able to establish a data connection with the control system, the entry of the
IP address and the port is necessary.
Saving the settings
All rights reserved. Reprinting, including excerpts, not permitted without the express consent of ESERA GmbH.
Subject to technical changes. ESERA GmbH 2023
www.esera.de
192.168.2.20
255.255.255.0
192.168.2.1
192.168.2.1
1
2
3
12002 V2.0 R1.1 configuration ETH
Page 5 from 7