esera 12002 구성 - 페이지 4
{카테고리_이름} esera 12002에 대한 구성을 온라인으로 검색하거나 PDF를 다운로드하세요. esera 12002 7 페이지.
페이지 인쇄7
SETTINGS TCP SERVER
You may assign an IP address to the eBus coupler Ethernet via DHCP server or set it to a fixed IP address.
We recommend the operation with a fixed IP address.
Settings
If you set the IP address to fixed, the settings for gateway and DNS server are also fixed.
to be entered. The module must be operated in the same subnet as your computer.
Select TCP Server
Settings (example)
•
Fixed IP address
•
Subnet Mask
•
Gateway:
•
DNS Server:
1:
MAC address of the eBus coupler,
2:
IP address, subnet mask and gateway and port, e.g. 5000
3: Operating mode: TCP server
1
Saving the settings
Save the settings via the "Save Setting" button. This completes the configuration of the interface
Note:
Clicking the "Factory" button restores the factory settings of the Ethernet interface, but not the settings of the
delivery state.
All rights reserved. Reprinting, including excerpts, not permitted without the express consent of ESERA GmbH.
Subject to technical changes. ESERA GmbH, 2023
www.esera.de
192.168.2.20
255.255.255.0
192.168.2.1
0.0.0.0
2
3
12002 V2.0 R1.1 configuration ETH
Page 4 from 7