esera 12002 구성 - 페이지 2
{카테고리_이름} esera 12002에 대한 구성을 온라인으로 검색하거나 PDF를 다운로드하세요. esera 12002 7 페이지.
페이지 인쇄Note
The module may only be operated at the voltages and under the ambient conditions specified for it. The
operating position of the device is arbitrary.
The modules may only be commissioned by a qualified electrician.
Further information on the operating conditions can be found in the operating instructions for the under
"Operating conditions".
3
TERMINAL PROGRAM / PROTOCOL
The eBus coupler with Ethernet interface (Art. No. 12002) translates the running data of the eBus for different
programs via TCP or UDP data transfer.
As test program e.g. the program "Hercules" or Putty
may be used.
Hercules:
http://www.hw-group.com/products/hercules/index_en.html
Putty:
http://www.chiark.greenend.org.uk/~sgtatham/putty/download.html
4
SOFTWARE DOWNLOAD
Copy the downloaded zip file to any directory.
Unzip the zip file e.g. with the free software 7-Zip (http://www.7-zip.de/)
5
WINDOWS PORT RELEASE
For the communication between eBus coupler and your Windows control software, e.g. IP-Symcon, Putty or
Hercules, a release of the selected port of the Config-Tool under Windows is necessary.
Unfortunately, it is not enough to disable the firewall, but you must explicitly enable the ports for sending and
receiving via TCP and/or UDP in Windows.
You can find the activation under WINDOWS:
Control Panel / System and Security / Windows Firewall / Advanced Settings
=> Incoming rules
=> Outgoing rules
All rights reserved. Reprinting, including excerpts, not permitted without the express consent of ESERA GmbH.
Subject to technical changes. ESERA GmbH, 2023
www.esera.de
12002 V2.0 R1.1 configuration ETH
Page 2 from 7