esera automation ECO 208 PRO 사용자 설명서 - 페이지 14
{카테고리_이름} esera automation ECO 208 PRO에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. esera automation ECO 208 PRO 18 페이지. Professional 1-wire controller
페이지 인쇄
14.6
Web server, Disable AP Mode, Maxi Interface
In addition to a LAN interface, the ECO Controller with Maxi Interface also has a connectable WLAN access point
that you can use for configuration and data communication. The access point is activated by a button on the unit's
surface. To activate the access point, press the 'WLAN Mode' button for approx. 3 seconds.
Activation is confirmed by the LED and the display. Now you can connect to the ECO Controller using a WLAN-
capable device with a web browser. To do this, select the access point "ESERA". The web server of the ECO
Controller can be reached via the IP address 192.168.4.1.
A data connection via ESERA ASCII and Modbus/TCP can now also be established via the IP address. The
access point is now permanently in operation.
You can deactivate the access point by pressing the "WLAN Mode" button again or by pressing the "Disable AP
Mode" button described below.
It can only be reactivated by pressing the "WLAN Mode" button.
* if the sensor or actuator supports Auto-E-Connect. For details, please refer to the operating instructions of the sensor or actuator.
All rights reserved. Reproduction as well as electronic duplication of this user guide, complete or in part, requires the written consent of
ESERA GmbH. Errors and technical modification subject to change. ESERA GmbH 2021
www.esera.de
Disable AP Mode
To switch off the WLAN access point, press the "YES"
button.
Press the "No" button to exit the menu without making
any changes.
Click on the "LogOut" button to exit the web interface..
11603-48 V1.0 R1.1 Manual
Page 14 of 18