Division 6 Dual Mini Sequencer 사용 설명서 - 페이지 11

{카테고리_이름} Division 6 Dual Mini Sequencer에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Division 6 Dual Mini Sequencer 14 페이지.

The internal clock uses the PIC microcontroller's built-in oscillator for timing, so it may not be

super-accurate. We still recommend using an external clock if you're doing something that is

timing-critical.

PROG/RESET Button

The RESET button now has an additional function (or rather a bunch of them). It is used in

conjunction with some of the other buttons on the sequencer to enable and disable various

modes (as indicated by the text in the white rectangles for more common functions).

AUTO ADVANCE

When this mode is enabled and you are programming a sequence, once you enter a NOTE or

REST or LOOP into a step, the sequencer will automatically advance to the next step. This lets

you just play your sequence into the sequencer without having to press STEP UP in between

each step, making initial programming of a sequence easier.

Note: Gate timing selection, SLURs, and ACC mode selection are not available in AUTO

ADVANCE mode. You can enter in the basic structure of your sequence then go back in normal

PROGRAM mode and tweak the timings, etc.

To enable or disable AUTO ADVANCE mode, hold down the PROG/RESET button and tap the

STEP DOWN/AUTO ADV button. The STEP 16 LED will blink twice when enabled and flicker

dimly when disabled.

Once enabled, AUTO ADVANCE mode stays on until the next time you put the sequencer in RUN

mode, at which time it will disable itself. That is unless you enable...

PERSISTENT AUTO ADVANCE MODE

To ensure that AUTO ADVANCE mode stays turned on until you manually turn it off (even if you

press RUN), enable PERSISTENT AUTO ADVANCE MODE by pressing and holding PROG/RESET,

pressing STEP DOWN/AUTO ADV, and holding both buttons for 1 second. The STEP 16 LED will

blink twice dimly when enabled and flicker once dimly when disabled.

LIVE TRANSPOSE