Acoustic Signature TA-2000 사용 설명서 - 페이지 4

{카테고리_이름} Acoustic Signature TA-2000에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Acoustic Signature TA-2000 8 페이지. Pick-up arm

1. Preparing the arm mounting board

To mount the TA 2000 tonearm your turntable need´s to have a

23mm thru hole combined with 3 M3 thread´s around it at the

Radius of 20.5mm (see drawing). Rega Dimension. SME versions

are also offered.

Ensure that the thread´s are positioned as showed in the drawing.

The distance of the center hole to the middle of the platter must

222 mm / 9 Zoll

be:

237,80 mm / 10 Zoll

295,60 mm / 12 Zoll

222 mm for the 9 inch version 237,80mm for the 10 inch version

295,60 mm for the 12 inch version

2. 2. Fitting the arm SME type

Take the provided 4 screws and put them into the marked 4 holes.

Use the provided allen key to tighten the screw´s.

To get easier access to the holes it might be helpful to turn the

armtube so the holes are free, or take the arm out and assemble

the armbase first.

3. Antiskating

To adjust the Antiskating use the Antiskating Adjustment knob and

adjust the correct value by turning.

Antiskatingknop