Acoustic Signature TA-2000 Kullanım Kılavuzu - Sayfa 4
Endüstriyel Ekipmanlar Acoustic Signature TA-2000 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Acoustic Signature TA-2000 8 sayfaları. Pick-up arm
Sayfayı Yazdır
1. Preparing the arm mounting board
To mount the TA 2000 tonearm your turntable need´s to have a
23mm thru hole combined with 3 M3 thread´s around it at the
Radius of 20.5mm (see drawing). Rega Dimension. SME versions
are also offered.
Ensure that the thread´s are positioned as showed in the drawing.
The distance of the center hole to the middle of the platter must
222 mm / 9 Zoll
be:
237,80 mm / 10 Zoll
295,60 mm / 12 Zoll
222 mm for the 9 inch version 237,80mm for the 10 inch version
295,60 mm for the 12 inch version
2. 2. Fitting the arm SME type
Take the provided 4 screws and put them into the marked 4 holes.
Use the provided allen key to tighten the screw´s.
To get easier access to the holes it might be helpful to turn the
armtube so the holes are free, or take the arm out and assemble
the armbase first.
3. Antiskating
To adjust the Antiskating use the Antiskating Adjustment knob and
adjust the correct value by turning.
Antiskatingknop