3DUpFitters CR-10 S5 설치 매뉴얼 - 페이지 10

{카테고리_이름} 3DUpFitters CR-10 S5에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. 3DUpFitters CR-10 S5 15 페이지. Enclosure kit

6. Attach Right Side

The right side is tricky to attach because of the

large size of the enclosure. Although attaching it

consists of simply screwing it to existing

connectors, unless you have exceedingly long

arms you will need a buddy to help hold the

nuts in place. Customers have done everything

from having a child climb into the enclosure to

placing the entire enclosure on the side of a

table to access the nuts.

7. Attach Feet (Optional)

The feet are optional, and raise the enclosure

from the surface slightly, making it easier to run

cables. If you've also purchased an air ﬁlter, it

helps bring in air from the outside to run through

the ﬁlter, at the expense of slightly lowering the

ambient temperature inside the box.

8. Attach Cables

Because of the large size of the enclosure and the printer, getting the full vertical range and

ﬂexibility in control box placement will require purchase of cable extenders. These are easily

available on eBay and Amazon.