ESI ESRTD5VF 설치 지침 매뉴얼 - 페이지 9

{카테고리_이름} ESI ESRTD5VF에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ESI ESRTD5VF 12 페이지. Digital room thermostat with tpi & delayed start
ESI ESRTD5VF에 대해서도 마찬가지입니다: 사용자 지침 (16 페이지)

페이지 인쇄

Installing the Room Thermostat

2.6

1. Use a flat headed screwdriver to press the fastener at

the top of the unit, then gently loosen from the unit,

unhooking from top to bottom.

2. Fix the 35mm back box, terminals at the top, onto a

2 flange metal back box with 2 BM3.5x23 screws. If

installing on a 4 flange metal back box, simply push down

the flanges on the top and bottom to leave the flanges

on the left and right hand side.

3. Route the wires through the back of the wall plate.

Fit the wires to the wall-plate in accordance with

the relevant diagram and in accordance with IEE

regulations.

4. Select personal options by referring to DIP switch menu

(See section 2.2.3).

If there are 4 flanges,

push down the top and

bottom flanges to leave

just 1 on either side.

Use a 35mm back box

with 2 screw flanges.