ESI ESRTP4 사용자 지침 - 페이지 18

{카테고리_이름} ESI ESRTP4에 대한 사용자 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. ESI ESRTP4 20 페이지. Programmable room thermostat
ESI ESRTP4에 대해서도 마찬가지입니다: 설치 지침 매뉴얼 (16 페이지)

페이지 인쇄

To operate the copy function

1. Switch the slider to PROG and press the

Button.

2. Press the C button to enter the COPY mode.

3. The A button chooses the day you want to copy from

and the +/- buttons choose the day you want to copy to.

4. Press the C button to confirm. The screen will show SEr

(to show the Copy function is set).

Battery Replacement

4.3

When the low battery symbol flashes in the LCD display, the

batteries need to be replaced as soon as possible. The battery

compartment is located on the front of the thermostat, under

the fascia cover. Remove the old batteries and insert new

ones. All settings including time are maintained.

N.B. If the display ever goes blank during normal operation,

the batteries need to be replaced with high quality

alkaline cells. The date, time and factory pre-set heating

times will be retained (assuming the back up battery has

not failed).

Resetting the Unit

4.4

To reset the programmer, hold reset for approx. 3 seconds.

The system and programme will restore to the factory default

settings. Hold the Next

to restore to factory default settings.

button and press the reset button

Home