ESI ESRTP4 Instruções para o utilizador - Página 18

Procurar online ou descarregar pdf Instruções para o utilizador para Termostato ESI ESRTP4. ESI ESRTP4 20 páginas. Programmable room thermostat
Também para ESI ESRTP4: Manual de instruções de instalação (16 páginas)

Imprimir página

To operate the copy function

1. Switch the slider to PROG and press the

Button.

2. Press the C button to enter the COPY mode.

3. The A button chooses the day you want to copy from

and the +/- buttons choose the day you want to copy to.

4. Press the C button to confirm. The screen will show SEr

(to show the Copy function is set).

Battery Replacement

4.3

When the low battery symbol flashes in the LCD display, the

batteries need to be replaced as soon as possible. The battery

compartment is located on the front of the thermostat, under

the fascia cover. Remove the old batteries and insert new

ones. All settings including time are maintained.

N.B. If the display ever goes blank during normal operation,

the batteries need to be replaced with high quality

alkaline cells. The date, time and factory pre-set heating

times will be retained (assuming the back up battery has

not failed).

Resetting the Unit

4.4

To reset the programmer, hold reset for approx. 3 seconds.

The system and programme will restore to the factory default

settings. Hold the Next

to restore to factory default settings.

button and press the reset button

Home