ESI 3V-LX-C4848-30 Series 사용 설명서 - 페이지 3

{카테고리_이름} ESI 3V-LX-C4848-30 Series에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. ESI 3V-LX-C4848-30 Series 12 페이지. Victory-lx 3 leg electric table base

페이지 인쇄

1. Digital Keypad

ASSEMBLY

STEP 1

Place the table top facing down on a soft clean surface.

STEP 2

Attach the center leg brackets to the center leg (the

leg with the glide on the end opposite the motor).

• Lay the center leg on the work surface with the

motor pointing up.

• Using the 5mm Allen key and four M6x18 socket cap

screws (with round tip), attach the brackets to the

motor, as shown.

STEP 3

Arrange the side legs, center leg, cross channels and top supports as shown below.

• Positioning does not need to be exact at this time.

• The longer cross channels are toward the rear of the table.

• The longer sections of the cross channels are toward the sides.

• The set screws on the cross channels face inward, toward each other.

• Holes on the sides of the outer top supports are offset to the rear.

Leg Column

Large Holes

Face Outward,

Offset Toward Rear

Center Top

Support

Rear

Front

Left Top

Support

VICTORY-LX 3 LEG ELECTRIC TABLE BASE

Motor

Center Leg Column

with Brackets

Set Screws

Face Inward

Shorter

Cross Channel

M6x18

Round Point

Small Top Holes for

Center Bracket

Attachment

Longer

Cross Channel

Inner

Cross

Channels

Leg Column

Right Top

Support