ClearOne XAP TH2 설치 및 운영 매뉴얼 - 페이지 14

{카테고리_이름} ClearOne XAP TH2에 대한 설치 및 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ClearOne XAP TH2 20 페이지. Telephone interface
ClearOne XAP TH2에 대해서도 마찬가지입니다: 데이터시트 (2 페이지)

페이지 인쇄

If networked XAP 800s

and TH2s are stacked

vertically, connect them

using the short RJ-45 jumper.

When networking between long

distances, use category five

twisted-pair

(10BaseT

cable. The maximum cable run

between

XAP

800/400

PSR1212 units is 80 feet (24

The first XAP unit's Expansion Bus Out connector is then attached

to the Expansion Bus In connector on the next unit in the chain. At

the end of the network, the final unit must have the Expansion Bus

Out connector terminated with an Expansion Bus terminator as well.

An expansion bus network will allow interconnection of up to 16

XAP TH2s and any combination of XAP 800s/400s and PSR1212s where the

LAN)

number of microphone inputs does not exceed 64.

and

Connecting power

The power input [A] will operate at any level between 100–240VAC, 50–60Hz, 15W

(typical). Plug in the XAP TH2 to complete the hardware installation.

Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760

Installation

~ Hardware Setup