ClearOne XAP TH2 설치 및 운영 매뉴얼 - 페이지 16
{카테고리_이름} ClearOne XAP TH2에 대한 설치 및 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ClearOne XAP TH2 20 페이지. Telephone interface
ClearOne XAP TH2에 대해서도 마찬가지입니다: 데이터시트 (2 페이지)
페이지 인쇄12
Figure 3.2. Unit Properties General tab
Figure 3.3. Unit Properties Comm tab
Figure 3.4. Unit Properties Security tab
2.
If you have already established a connection with the site, the Device
ID will be assigned. If you are working offline, select the Device ID that
matches the ID you assigned the unit via the back-panel DIP switches.
Device IDs ensure the software will sync up with the proper unit when there
are multiple TH2s on a network.
3.
Adjust the Meter Refresh rate as necessary. The default rate is 50ms.
4.
Select the country where this product is being used from the
Country Code list.
Warning:The country code must be set correctly to ensure that the unit
operates properly when connected to the telco network and complies with
the country's telco requirements. Changing this code to a country other
than the intended country of operation might cause the XAP TH2 to be
non-compliant.
5.
Click the Comm tab. The Baud Rate and Flow Control settings are changed
using the Site Properties window. Select the Serial Echo and Serial Mode
you want to use.
Serial Echo enables the unit to echo back the commands you send over the
E-bus network. Serial Mode determines the format (binary or text) in which
the commands return over the E-bus network. The default setting when
G-Ware is connected to a unit is binary. When the unit is disconnected, the
default is text.
6.
Select Use Modem if a modem will be used with the unit.
7.
Click the Security tab to enter a Modem Password. This password will be
required for all connections made to the RS-232 port whether it be modem,
direct connection to PC, or AMX touch panel.
8.
Click OK to save settings and close the Unit Properties window.
You will need to repeat this process for all XAP TH2 units on your network.
Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760
Configuration
~ G-Ware