Akiyama CDS-FX 사용 설명서 - 페이지 5
{카테고리_이름} Akiyama CDS-FX에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Akiyama CDS-FX 11 페이지.
페이지 인쇄PART NAMES AND FUNCTIONS
CONNECTIONS PANEL
2
1
3
1. DIGITAL OUT
Digital output jack for connecting to D/A converter.
2. LINE OUT
Output connector, connected to the input terminals on amplifier or
console.
3. REMOTE
This unit can be connected with POINEER DJM500 for fader start
controlled by the mixer.
BASIC OPERATIONS
1. Loading and ejecting the disc
* Press the "OPEN" knob to open the disc compartment door.
* Load disc: Correctly place a disc in the center of disc compartment
with the label side up not to place more than one disc.
* Push the door in to close it.
* Press the PLAY/PAUSE button to start the playback.
2. Track skip
Use the TRACK SKIP control to advance ( ) or reverse ( ) to a
desired track.
3. FRAME SEARCH
* JOG DIAL
In pause mode, dial the jog, the playback will move by frame or
frames depending on the speed you dial.
TROUBLESHOOTING
Symptom
Door can not be opened when the OPEN
button is pressed.
When playback is started, stops or pauses
immediately.
No sound
Sound is distorted
Hum
4
CDS-FX
AKIYAMA. 08191 BARCELONA (SPAIN)
line out
digital
L L
out
AC 230V~50Hz 12W
AC 230V~50Hz 12W
COMPACT DISC PLAYER
COMPACT DISC PLAYER
R R
SERIAL NO.:
SERIAL NO.:
remote
relay
MADE IN CHINA
MADE IN CHINA
Power plug is not connected properly.
* Disc is loaded upside down.
* Dust or dirt on the disc.
* Output cables connected unproperly.
* Audio mixer operated unproperly.
* Pin plugs or amplifier terminals are dirty.
* Player is in pause mode.
* Incorrect connection.
* Pin plugs or amplifier terminals are dirty
Cable connected unproperly.
cds-fx
CAUTION
RISK OF ELECTRIC SHOCK
CAUTION, RISK OF ELECTRIC
S H O C K , D O N O T O P E N .
ATENTION: TO REDUCE RISK
power
on
off
4. AC POWER CORD
Connect it to a power outlet.
5. POWER SWITCH
Press the power switch to turn the unit on. To switch the POWER off
press the POWER switch again.
6. RELAY JACK
Connect this unit to a mixer or controller.
* SEARCH KNOB
Press the search control (
frame per press; keep pressing the control, it will move rapidly with
sound.
4. PITCH CONTROL KNOB
* JOG DIAL
In play mode rotate the job clockwise to speed up; rotate
counterclockwise to slow down.
* PITCH CONTROL KNOB
Move the knob toward +16 direction, the playback become fast;
move it toward -16 direction, the playback become slow.
Cause
Correctly connect the plug.
* Load the disc with label side up.
* Clean the disc and load it again.
* Connect the cable properly.
* Check the setting of audio mixer.
* Press the PLAY/PAUSE button.
* Connection with audio mixer to the
LINE INPUT terminals.
* Clean away the dirt.
* Firmly connect all audio plugs.
4
5
6
or
) in pause mode to move by one
Remedy