ClearOne Beamforming 설치 매뉴얼 - 페이지 13

{카테고리_이름} ClearOne Beamforming에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ClearOne Beamforming 18 페이지. Beamforming microphone array systems group microphone for professional conferencing

페이지 인쇄

Notice that the Mic Mounting Plate (C) has four holes used for mounting

to the back of the Beamforming Microphone Array. There are three

slotted keyholes big enough for screw heads to pass through and one

hole that is not slotted.

Place the Mic Mounting Plate on the back of the Beamforming

Microphone Array and insert the screws (A) into the Beamforming

Microphone Array corresponding to the holes in the Mic Mounting Plate.

Tighten all screws with the #1 Phillips screwdriver.

For mountings with the cables coming through the wall, hold the

Beamforming Microphone Array with the Mic Mounting Plate attached,

route the E-bus and PoE cables under the Mic Mounting Plate to the

ends where they will be connected.

WALL MOUNT INSTALLATION GUIDE

Cable Retention Clips

Install and tighten all screws.

Use #1 Phillips screwdriver bit

to avoid damaging screws.

Wall Mount Installation Guide

A 4X