ClearOne Beamforming Руководство по установке - Страница 13
Просмотреть онлайн или скачать pdf Руководство по установке для Микрофонная система ClearOne Beamforming. ClearOne Beamforming 18 страниц. Beamforming microphone array systems group microphone for professional conferencing
Печатать страницу
Notice that the Mic Mounting Plate (C) has four holes used for mounting
to the back of the Beamforming Microphone Array. There are three
slotted keyholes big enough for screw heads to pass through and one
hole that is not slotted.
Place the Mic Mounting Plate on the back of the Beamforming
Microphone Array and insert the screws (A) into the Beamforming
Microphone Array corresponding to the holes in the Mic Mounting Plate.
Tighten all screws with the #1 Phillips screwdriver.
For mountings with the cables coming through the wall, hold the
Beamforming Microphone Array with the Mic Mounting Plate attached,
route the E-bus and PoE cables under the Mic Mounting Plate to the
ends where they will be connected.
WALL MOUNT INSTALLATION GUIDE
Cable Retention Clips
Install and tighten all screws.
Use #1 Phillips screwdriver bit
to avoid damaging screws.
Wall Mount Installation Guide
C
A 4X
11