ClearOne FlexCam USB 설치 및 운영 매뉴얼 - 페이지 4
{카테고리_이름} ClearOne FlexCam USB에 대한 설치 및 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ClearOne FlexCam USB 12 페이지. Flexible camera series
ClearOne FlexCam USB에 대해서도 마찬가지입니다: 사용자 설명서 (14 페이지), 사용자 설명서 (12 페이지), 설치 및 운영 매뉴얼 (10 페이지)
페이지 인쇄4
Getting Started
Installing USB drivers
Before you can use your FlexCam USB, you must install the proper USB drivers on
your PC or Mac.The drivers are found on the USB Software and Driver Disk that
came with your FlexCam USB.
To install USB drivers on a PC
1. Insert the USB Software and Driver Disk into the CD-ROM drive.
2. Plug in the FlexCam USB. The Found New Hardware Wizard will open.
Figure 2. Found New Hardware Wizard
3. Select Search for a suitable driver for my device (recommended).
Figure 3. Locate Driver Files
4. Select CD-ROM drives.
Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760
Getting Started
Getting Started
Figure 4. Driver Files Search Results
4. Once the Wizard has found the drivers, click Next to start the installation.
5. During the installation, a Digital Signature Not Found window might open.
Click Yes to continue.
Figure 5. Completed driver installation
6. When installation is complete, click Finish to close the Found New Hardware
Wizard.
There are three separate components that will be installed through the Found New
Hardware Wizard. Do not restart your computer until all three have been installed.
Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760
5