ClearOne FlexCam USB Installatie- en bedieningshandleiding - Pagina 4

Blader online of download pdf Installatie- en bedieningshandleiding voor {categorie_naam} ClearOne FlexCam USB. ClearOne FlexCam USB 12 pagina's. Flexible camera series
Ook voor ClearOne FlexCam USB: Gebruikershandleiding (14 pagina's), Gebruikershandleiding (12 pagina's), Installatie- en bedieningshandleiding (10 pagina's)

Pagina afdrukken
4

Getting Started

Installing USB drivers

Before you can use your FlexCam USB, you must install the proper USB drivers on
your PC or Mac.The drivers are found on the USB Software and Driver Disk that
came with your FlexCam USB.
To install USB drivers on a PC
1. Insert the USB Software and Driver Disk into the CD-ROM drive.
2. Plug in the FlexCam USB. The Found New Hardware Wizard will open.
Figure 2. Found New Hardware Wizard
3. Select Search for a suitable driver for my device (recommended).
Figure 3. Locate Driver Files
4. Select CD-ROM drives.
Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760
Getting Started
Getting Started
Figure 4. Driver Files Search Results
4. Once the Wizard has found the drivers, click Next to start the installation.
5. During the installation, a Digital Signature Not Found window might open.
Click Yes to continue.
Figure 5. Completed driver installation
6. When installation is complete, click Finish to close the Found New Hardware
Wizard.
There are three separate components that will be installed through the Found New
Hardware Wizard. Do not restart your computer until all three have been installed.
Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760
5