ClearSpan PB00566R3 사용 설명서 - 페이지 7

{카테고리_이름} ClearSpan PB00566R3에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. ClearSpan PB00566R3 18 페이지. Freestanding “hut” style model 14' wide x 14' high x 36' long

페이지 인쇄

Section B - Rafter Assembly

Step 1: Locate the 6 sections of pipe to make a rafter. This will include two swaged sections labeled

"1" which are straight at one end and curved at the other, two sections labeled "2" and "3"

which are curved throughout but "2" is swaged and "3" is not, and two extensions labeled "X."

Step 2: Fit the sections together starting with section "1" then "2" then "3" and then another "1" to

form an arch laying flat on the ground. Then, add a straight extension "X" to each end. It is

essential to perform this step on level ground or the completed rafter assembly will be twisted.

Step 3: Install the supplied 3/8" hex driver bit into the chuck of your drill/driver.

Typical End Rafter

Page 7