ClearSpan PB00566R3 Kullanım Kılavuzu - Sayfa 7
Çadır ClearSpan PB00566R3 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. ClearSpan PB00566R3 18 sayfaları. Freestanding “hut” style model 14' wide x 14' high x 36' long
Sayfayı YazdırSection B - Rafter Assembly
Step 1: Locate the 6 sections of pipe to make a rafter. This will include two swaged sections labeled
"1" which are straight at one end and curved at the other, two sections labeled "2" and "3"
which are curved throughout but "2" is swaged and "3" is not, and two extensions labeled "X."
Step 2: Fit the sections together starting with section "1" then "2" then "3" and then another "1" to
form an arch laying flat on the ground. Then, add a straight extension "X" to each end. It is
essential to perform this step on level ground or the completed rafter assembly will be twisted.
Step 3: Install the supplied 3/8" hex driver bit into the chuck of your drill/driver.
Typical End Rafter
Page 7